An electric car can have a manual transmission added to it. We’ve already seen an electric Ferrari get a new look by adding a manual gearbox. Okay, but is it possible to convert transmission from manual to auto?
If you spend enough money, time, and learn enough about cars. You can make any technical change into almost any car. A donor car with all the same parts as yours is what you need to have on hand. The only thing that should be different is the automatic transmission (if it’s electronic, like OBD or OBDII systems). If it’s not electronic, it doesn’t have to be an exact match.
What if I want to convert transmission from manual to auto?
You already know the answer, though. But how do you do it? If the car was made in the last few decades, or after the mid-1990s, the process will need more than just changing the gears. Along with a new wire harness, transmission mount, motor mount, and firewall repair. It will need a new ECU or computer.
For ease of use, here are the things you will need to change from a manual to an automatic transmission:
Changing the engine set up
Rearrange The whole system because an automatic transmission and an automatic gearbox do very different things.
Making changes to the gearbox
It makes sense since you are going to change the type of transmission. Not easy because you need to fix and make a lot of changes to get the new engine into your car. The new gearbox needs to work with the way your car’s engine is set up.
Some other changes
Change or replace a few other parts so that the new gearbox can fit in the car. If the body and engine wire harness doesn’t work with the new transmission and can’t send signals and power, it needs to be changed.
If the shifter is on the floor, you will need to either take off the floor panel or cut a hole in the carpet. For a column-mounting device, you need to do the same things to the column.
You might also need to change parts like a pump, a torque converter, and a few others so that the new gearbox fits and works well.
Convert Transmission from Manual to Auto: What Went Wrong?
The change is not a matter of if it is possible, but of whether it is possible. That is something you should only do if you have the money and the drive to do it. If you don’t, you’ll have a huge hole in your pocket when the job is over.
You will also have to deal with the following issues:
Choosing the right repair shop to convert transmission from manual to auto;
There aren’t many shops in the country with skilled mechanics who can do something this complicated. This job is almost certainly not going to be able to be done by an approved service center. Even if you find one, the prices will be so high that it will be cheaper to sell the car and buy an automatic. If you go to a shop that doesn’t allowed to do it, the warranty on the car will not cover it.
Some parts can’t be replaced.
You can’t just buy new parts for some things; you can only buy from the maker. On the other hand, you can’t use an aftermarket product to change the ABS (anti-lock braking system).
These days’ cars don’t have enough room.
The majority of cars today are smaller than old ones. They have put together the transmission and engine parts in a small space. Because of the lack of room, even a small change might not be possible.
How do I convert transmission from manual to auto? What do I need to remember?
When switching from a manual transmission to an automatic one, a lot of “new drivers” make simple mistakes with how they use the gas and stop pedals, which can make the car unsafe and damage parts easily.
Control the car with both feet.
There will be no clutch pedal on cars with automatic transmission; there will only be accelerator and stop pedals. In order to drive the car, the driver will only need to use his right foot to control the brake and the gas pedal. The left leg will be let go all the way.
But in fact, a lot of people are so used to driving and operating cars with manual transmissions that it’s hard to break the habit of using the left foot. So, you still use your left foot to press the brake and your right foot to press the pedal even though you drive an automatic car.
Experts say that when driving an automatic car with two feet, it is possible to hit the accelerator or stop pedal by accident, which can lead to sudden acceleration and losing control…
Not realizing that the gas pedal is actually the stop pedal
A lot of accidents have happened because drivers pressed the accelerator and stop pedals at the wrong times. They were not use to driving cars with automatic transmissions, after all.
For this reason, experts say that when driving an automatic transmission car, the driver should switch to lightly pressing the stop pedal when there is no need to. So, if something unexpected happens, the driver won’t be scared and hit the gas instead of the brake.
Switch from D to N
People who drive cars with manual transmissions usually shift from all gears to N when they stop at a red light or park on a hill… But if you have an automatic transmission, you have to give up this habit if you don’t want the transmission to last less long.
